> For the complete documentation index, see [llms.txt](https://docs.rmhpos.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta.md).

# Install Central Manager (mPulse BETA)

- [mPulse release documentation](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/mpulse-release-documentation.md)
- [Release 3.52.0.6 – New Features](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/mpulse-release-documentation/release-3.52.0.6-new-features.md)
- [Key concepts](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts.md)
- [Synchronization services and RabbitMQ](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts/synchronization-services-and-rabbitmq.md)
- [Third party data synchronization](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts/third-party-data-synchronization.md)
- [Docker and containerization](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts/docker-and-containerization.md)
- [Windows Server, VMs, and Portainer](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts/windows-server-vms-and-portainer.md)
- [Central Operation Manager](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts/central-operation-manager.md)
- [Logs](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/key-concepts/logs.md)
- [Multi-store (mPulse BETA) installation checklist](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/multi-store-mpulse-beta-installation-checklist.md): This topic provides a checklist for installing RMH in a multi-store (Central) deployment. Print out this checklist and cross off each step as you complete it.
- [System requirements (mPulse BETA)](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/system-requirements.md): This topic identifies the minimum and recommended system requirements for RMH.
- [Set up the head office](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office.md)
- [Run the Central Synch Service on Windows Server](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/run-the-central-synch-service-on-windows-server.md)
- [Enable Hyper-V for Windows](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/run-the-central-synch-service-on-windows-server/enable-hyper-v-for-windows.md): This topic describes how to enable Hyper-V on Windows Server or Windows 11 Pro.
- [Create an external virtual network switch for a VM](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/run-the-central-synch-service-on-windows-server/create-an-external-virtual-network-switch-for-a-vm.md): This topic describes how to create a external virtual network switch for a VM.
- [Create the Central VM](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/run-the-central-synch-service-on-windows-server/create-the-central-vm.md): This topic describes how to create a VM on Windows Server, where you can run Docker, the two head office containers (for the Central API and RabbitMQ message broker), and Portainer.
- [Open RMH Portainer and create the admin account](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/run-the-central-synch-service-on-windows-server/open-rmh-portainer-and-create-the-admin-account.md): This topic describes how to open RMH Portainer and create the admin account.
- [Create the Central stack and configure the Central environment](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/run-the-central-synch-service-on-windows-server/create-the-central-stack-and-configure-the-central-environment.md): This topic describes how to create the Central stack in Portainer and configure the Central environment.
- [Install and configure the Central Manager app](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/install-and-configure-the-central-manager-app.md): This topic describes how to install and configure the Central Manager app on a head office computer.
- [Add the store to Central Manager](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-head-office/add-the-store-to-central-manager.md): This topic describes how to add a store to Central Manager by entering the store's unique Store ID and assigning the store to a store group.
- [Set up the store](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-store.md)
- [Update the store database and synchronize GUIDs](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-store/update-the-store-database-and-synchronize-guids.md): This topic describes how to update the store database so it can function in a multi-store deployment.
- [(Optional) Run the Store Synch Service as a Windows Service](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-store/optional-run-the-store-synch-service-as-a-windows-service.md): This topic describes how to run the Store Synchronization Service as a Windows Service.
- [(Optional) Run the Store Synch Service in a Docker container](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-store/optional-run-the-store-synch-service-in-a-docker-container.md): This topic describes how to run the Store Synchronization Service in a Docker container.
- [Install and configure the Store Manager app](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/set-up-the-store/install-and-configure-the-store-manager-app.md): This topic describes how to install and configure the Store Manager app on a back office computer in the store.
- [Configure the offline database](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/offline-database.md)
- [About the offline database](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/offline-database/administrator-about-offline-db.md): This topic describes the best practices for configuring and managing an offline database, which stores can use to process sales transactions if POS loses its connection to the store database.
- [Configure the offline database](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/offline-database/administrator-configuring-offline-db.md): This topic describes how to configure the offline database.
- [Restore the connection to the store database](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/offline-database/administrator-synchronizing-offline.md): This topic describes the procedure to restore the POS app's connection to the store database after it has been operating in offline mode.
- [Monitor the deployment](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment.md)
- [Install the COM and log in](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/install-the-com-and-log-in.md): This topic explains how to install the COM and log in.
- [Manage notifications](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/manage-notifications.md)
- [Add notification groups](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/manage-notifications/add-notification-groups.md): This topic describes how to add notification groups. Notification groups are people who will be notified by email if specific health checks identify a problem.
- [Change notification group assignments](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/manage-notifications/change-notification-group-assignments.md): This topic describes how to change notification group assignments after initial setup.
- [Configure SMTP](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/manage-notifications/configure-smtp.md): This topic describes how to configure SMTP so COM can send email notifications to notification groups.
- [Add services for monitoring](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/add-services-for-monitoring.md): This topic describes how to add services that you want to monitor using the COM.
- [Set health check thresholds](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/set-health-check-thresholds.md): This topic describes how to set thresholds for COM health checks.
- [Set log retention thresholds](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/set-log-retention-thresholds.md): This topic describes how to set thresholds for retaining logs.
- [Review the dashboard](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/review-the-dashboard.md): This topic describes what information is available from the dashboard of the COM.
- [Review alerts](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/review-alerts.md): This topic describes how to review alerts in COM.
- [Review history](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/monitor-the-deployment/review-history.md): This topic describes how to review history in COM.
- [Upgrade from FLASH to mPulse BETA](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/upgrade-from-flash-to-mpulse-beta.md)
- [Upgrading a Portainer stack](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/upgrading-a-portainer-stack.md): This topic describes how to upgrade and redeploy a Portainer stack for a new RMH release.
- [Upgrading licensing](https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta/upgrading-licensing.md): This topic describes how to upgrade licenses for a new RMH release.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rmhpos.com/installation/install-central-manager-mpulse-beta.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
